VPI Player Turntable

  • Sale
  • Regular price $1,499.00


VPI Player Turntable

cert15.jpgUpscale Audio is the only VPI dealer in California that is VPI Trained & Certified to handle all of your VPI needs!

Everything you need to get into vinyl in one package! The VPI Player is an all in one high-end entry-level turntable. It comes complete with a phonostage, pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. It also has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers. The Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for!

SPECIFICATIONS

Table:

·      1.25’’ thick textured vinyl-covered non-resonant MDF
       chassis

·      16’’ x 11’’footprint

·      19” x 14” x 6” overall size

·      Aluminium Platter

·      Platter rotates on an oil bath bearing and fitted to
       shaft with a #2 Jacob’s Taper for a concentric rigidly
       mounted coupling

·      The bearing has a PEEK thrust disc and machined
       graphite impregnated brass bushings using a
       Thompson Engineering 60 Rockwell case hardened
       shaft

Tonearm:

·      New 9” vertical Yoke type tonearm with lateral
       turntable type bearing

·      Pivot to spindle: 223mm

·      Effective length: 240.7mm

·      Overhang: 17.7mm

·      Offset angle: 22.85 degrees

·      Average RMS distortion: .36%

·      VTA adjustable arm mount.

·      Damped stainless steel armtube.

·      Very pure copper wire, twisted with special insulating
       jacket

·      The armbase is upgradeable to a standard JMW 9 arm

Additional Specifications:

·      Type                           Belt drive (manual turntable)

·      Motor                          24v synchronous AC motor

·      Turntable Platter            Aluminium

·      Diameter                     11.81” (30.0 cm)

·      Turntable Speeds         33.3 RPM and 45 RPM

·      Wow and Flutter      .1% WRMS (in accordance with
                                              DIN specification)

·      Rumble                        < - 80dB (IEC 98A unweighted)

·      Cartridge                     Ortofon 2M Red

·      Output                        5 mV @ 1 KHz

·      Tracking Force             1.5 grams (recommended)

·      Input Load                   47K

·      Weight                        5.5 grams

·      Power Supply      10v VAC @ 60 Hz, 230v VAC @ 50hz

·      Power Consumption      7.7 watts at full output

·      Dimensions                  18.5” W x 13.5” D x 4.3” H

·      Weight                        12.9 lbs. (5.9 kg)