Tannoy Stirling Gold Reference Loudspeaker (each)

  • Sale
  • $2,999.99
  • Regular price $3,599.99


Tannoy Stirling Gold Reference Loudspeaker (each)

Single speaker price. Must be purchased in pairs.

Tannoy has been steadily refining a notable design for decades and has achieved some remarkable results, especially in terms of the faithful reproduction of instrumental and vocal sonorities.
— ANDREW QUINT, THE ABSOLUTE SOUND, MAY 2016

 

This compact floor-standing loudspeaker is rich with the timeless styling, bespoke cabinetry and the truly engaging performance from its new Dual Concentric Gold Reference driver that can trace its history back to 1967.

The Stirling GR crossover benefits from a widespread component upgrade including highest quality capacitors designed to TANNOY’s exacting specification. The entire crossover board undergoes Deep Cryogenic Treatment, a technique TANNOY developed for the flagship Kingdom Royal project. This improves the crystal structure of not only the components and cabling on the hard-wired crossover-board but throughout the contacts and solder joints leading to a smoother and more natural presentation.

The Stirling GR cabinet is hand built from the finest plywood using traditional joinery methods to ensure that attention to detail and unique styling go hand in hand. A distributed port design for exemplary LF response from the 85-litre enclosure, the cabinet is finished in Prestige oiled real walnut wood veneer and complimented with solid walnut trim and edging, machined metal trim and adjustable HF power.

Capable of handling peak input power of up to 340 watts and boasting prodigious 91 dB efficiency, the Stirling has the power and authority of much larger and more affluent loudspeakers. It is detailed, dynamic and outstandingly articulate sound with all the musical cohesion inherent with the Dual Concentric driver. Stirling GR offers the bespoke cabinetry and remarkable performance of TANNOY’s Prestige series, yet costs no more than a typical mass produced loudspeaker.

Specifications

Recommended amplifier power: 20 - 170 W
Continuous power handling: 85 W RMS
Frequency response (-6 dB): 39Hz - 46kHz
Sensitivity: 91dB (2.83 Volts @ 1 m)
Nominal impedance: 8 ohm (5 ohm min)
Drivers: Dual Concentric high-frequency (25mm (1.00) aluminium alloy dome with Tulip Waveguide), Dual Concentric low-frequency (254mm (10.00") treated paper pulp cone with HE twin roll fabric surround. 42mm (15/8") edge wound voice coil)
Dispersion: 90 degrees conical
Crossover Frequency: 1.8kHz
Type: Bi-wired, hard-wired passive, low loss 2nd order compensated LF, 2nd order
HF Adjustment: +/- 3dB over 1.8 kHz to 46 kHz shelving
Enclosure type: Distributed Port Volume: 85 L (3 cu ft)
Dimensions: 33.5" x 15.5" x 14.5" (850 x 397 x 368mm)
Weight: 23 kg (50.7 lb)


Customer Reviews

Based on 1 review Write a review

Call for Info      

 

(909) 931-9686