Soundsmith Sussurro Mk II
Made in the USA. Rebuild Price? ~ $650 ~ Less than 20% of MSRP, as always ! - Includes a two-year warranty for original owner!
The Sussurro ~ critical design decisions, realized. Lowest internal mass. Best damping. Esoteric stylus and cantilever. If you need to stay in constant contact, your cartridge has arrived.
Inspired by Frank Schröder, designed and individually hand made by Peter Ledermann, Soundsmith's Sussurro is a cartridge designed to specifically address the most intricate and critical issues of cartridge design. The new MKII Sussurro has a newly designed moving iron element to reduce moving mass by 70%; extremely low stored energy, the new MKII damping system and an innovative energy distribution path to effectively transfer mechanical energy away from the cantilever through the cartridge body into the tone arm. So what does all this mean??
Low jitter. Jitter? You probably thought that was a term reserved for digital systems. Not so. Stylus jitter is responsible for loss of detail, and making a cartridge sound, well, like a cartridge. The Sussurro stays in constant contact with the record groove. If you are not in constant contact, you can’t hear what has truly been recorded.
Stylus: Contact Line Nude, 0.100mm SQ
Radius of curvature: Optimized Contour Contact Line
Recommended Tracking Force: 1.8 to 2.2 grams
Tip Mass: 0.30 mg
Compliance: 10 um/mN (low compliance)
Frequency Response: 20-20,000 Hz +/- 1.0 dB
Channel Separation: 1000 Hz Greater Than 34 dB, 50-15,000 Hz Greater Than 25 dB
Channel difference: Less Than 0.5 dB
Output voltage: 0.4mV
DC Resistance (DCR): 10-11 Ohms each channel
Coil: 2.75 mH each channel
Suggested Preamp Gain: 58-64 dB
Soundsmith Recommends: MCP2 Variable Loading Preamp
Cartridge weight: 10.25 grams
Loading: >= 470 Ohms