PSB CW600E Enclosed In-Wall Loudspeakers (each)
The 600E derives its D'Appolitio speaker array directly from our highly acclaimed Platinum T6 tower and incorporates a fully enclosed and internally braced enclosure designed to fit standard 16-inch-studded construction.
A pair of 6.5-inch fiberglass cone midrange flanking a 1-inch ferrofluid-cooled tweeter optimize use of the narrow enclosure to deliver a traditional "tower" performance. The result is a cost effective in-wall alternative where space does not compromise the sound quality.
In-wall speakers confront special acoustic challenges. Limited interior space confines their effective enclosure volume, while comparatively flimsy partition construction is no substitute for a true loudspeaker cabinet. There’s rarely enough in-wall volume for real bass extension, and the same factor dooms most in-walls to being both unusually power hungry and dynamically limited.
For the PSB CustomSound premium in-wall system, the CW600E, the solution is a design that utilizes its own fully engineered loudspeaker enclosure. Derived from the highly acclaimed Platinum T6 tower, the CW600E incorporates a tall, narrow, highly braced, fully enclosed, wooden enclosure just four inches deep that fits fully within standard, 16-inch-studded construction.
The CW600E’s dual 6 1/2-inch (165mm) high-power woofers employ incredibly stiff fiberglass cones and higher mass to optimize them to their enclosure volume. The same MTM (midrange-tweeter-midrange) array found in the acclaimed PSB Platinum T6 tower, and a specially optimized crossover match system balance to the PSB Platinum Series while extending bass response. The result is superb, “Platinumclass” clarity and dynamics, with a highly dispersive “sweet spot” so wide and tall that even large home-theater audiences will enjoy maximum definition of movie sound and music alike. A “dog-leg” mounting scheme assures fast, fool-proof and easy mounting.
The PSB CustomSound CW600E design finally settles the longstanding conflict between sound and design.
- “Platinum-Class” In-Wall performance
- Five Driver, 3-way system utilizes Platinum T6 drivers
- with stiff fiberglass cones and higher cone mass to
- optimize them to their restricted enclosure volume
- Fully enclosed, highly braced wooden enclosure fits
- within standard, 16” studded wall
- Midrange-tweeter array provides “Platinum-class”
- clarity and dynamics with a highly dispersive “sweet
Frequency Range (-6dB): 45-35,000Hz
Recommended Power: 15-200 Watts
Impedance: 6 Ohms
Sensitivity (1W (2.83V) @1m)
Anechoic Chamber: 86dB SPL
Typical Listening Room: 88dB SPL
Drivers: 2 x 6 1/2” Woofers,
2 x 3 1/2” Midranges,
1” Dome Tweeter
Overall Dimensions (W x H x D): 14 x 31 3/4 x 3 3/4”
Cut-out Dimensions (W x H): 12 7/8 x 30 13/16”
Weight: 31 lbs