NOTICE: Be sure to enter the Make & Model of component you are purchasing tubes for. Failure to do so will delay processing of your order. We do not ship tubes without this information.
Super cool KT88 variant made by New Sensor in Russia. This tube is a drop-in replacement for KT88s... no special re-wiring required! The KT120 is rated to have a plate dissipation of 60W... compared with the 35W of the 6550, the 42W of the KT88, that's a lot of juice!
The KT120 also draws more filament current from your amp's output transformer(s). Before you buy them, check with your amp's manufacturer to make sure you've got enough headroom.
One quick note: The KT120 is about 1/2" taller than a typical KT88, so if your KT88s are already a tight squeeze in your equipment, you may want to measure to make sure you have enough clearance before placing an order.
Pricing above includes matching in any quantity you need at no extra charge.
All power tubes are Platinum Screened & Tested to the highest standards, including a 72-hour burn in process, and testing at real-world voltages.
Every power tube is different. This applies especially to power tubes like EL34, 6550, KT88’s, etc. Two tubes can be brand new in the original box, with one testing at, as an example, 6500 micro ohms, the next one at 8600 micro ohms. Both tubes would be considered "new" by the factory, and not defective. While the weaker tube isn’t "defective," it will certainly have a shorter life. So if you pay 10% less, you might get a tube with a significantly shorter life. The big lie from manufacturers of tube equipment and tube dealers themselves is that they “reject” these tubes. It’s not true. You can imagine the nightmare that would create for the tube factory if people are sending back 50% - 80% of the tubes that get shipped, coming back in all kinds of condition.
As the owner of Upscale Audio, a company that has supplied tubes into over 50,000 components, and someone obsessed with treating your amp like it’s my amp, I can tell you in no uncertain terms the factory doesn’t take them back. The only tubes they will take back are tubes that have shorts, gas, or measure BELOW the minimum number they assign for that tube type (it varies from type to type, so don’t bother trying to figure that out).
I’ve overcome that issue for you. I can say with calm assurance that we pay the factories more for our tubes than any other tube seller, and we ensure that we receive the absolute cream of the crop. This flies against the logic of how to run a business: The way you make money is to pay less for the goods you sell! That’s what most ANY business owner will tell you. We also don’t sell certain brands of tubes because while they might be cheap and sometimes good, they can be more trouble than they're worth. We pass on a lot of money as a result.
Upscale Audio is the only dealer that does what we do on a grand scale, and have a deep understanding of high end tube electronics. We’re the only dealer that manufacturers give a thumbs-up to, and recommend to their customers. And I promise you only the best.
- Kevin Deal